Taylormade shaft with adaptor raw length - Toronto Golf Nuts

br1828 · Jul 27, 2012, 10:31 AM

I want to know what the driver would play to if a shaft installed into the TM sleeve/adaptor from tip to butt is 44 inches. I did a search. Some say + 1.5 inches so 45.5 and some say + 1.25 inches. I've also heard 2 inches. Does any one know?

dekker · Jul 27, 2012, 04:04 PM

The overall would be dependent on the model of head and its BBGM.(Bottom Bore to Ground Measurement)

br1828 · Jul 27, 2012, 10:59 PM

Asking about a superdeep head

dekker · Jul 28, 2012, 09:49 AM

I don't have the BBGM measurement for that head.
I would take the fit shaft to GT and politely ask them if they could help you out by fitting it into a Superdeep head. That would be the simple solution.

nykthornhill · Jul 28, 2012, 09:55 AM

great club

dekker · Jul 29, 2012, 05:48 AM

As a backup plan should my first suggestion be too troublesome for the staff,take a measure tape to GT and simply measure the shaft length as inserted in one of theirs. Remember The r9 overall length is 45.5

Jul 27, 2012, 10:31 AM	#1
br1828 Club Pro Join Date: May 3, 2007 Location: North York/Markham Posts: 675	Taylormade shaft with adaptor raw length I want to know what the driver would play to if a shaft installed into the TM sleeve/adaptor from tip to butt is 44 inches. I did a search. Some say + 1.5 inches so 45.5 and some say + 1.25 inches. I've also heard 2 inches. Does any one know?

Jul 27, 2012, 04:04 PM	#2
dekker Tour Pro Join Date: Aug 3, 2006 Posts: 11,077	Re: Taylormade shaft with adaptor raw length The overall would be dependent on the model of head and its BBGM.(Bottom Bore to Ground Measurement) __________________ Titleist 975D 9.5Pro-lite35x Steelhead plus3 DG R300 TM Rescue 18Bubble s90 JNP 3-pw BV RAW 52,56 Hoofer Xtreme Ping Pal 5ks

Jul 27, 2012, 10:59 PM	#3
br1828 Club Pro Join Date: May 3, 2007 Location: North York/Markham Posts: 675	Re: Taylormade shaft with adaptor raw length Asking about a superdeep head

Jul 28, 2012, 09:49 AM	#4
dekker Tour Pro Join Date: Aug 3, 2006 Posts: 11,077	Re: Taylormade shaft with adaptor raw length I don't have the BBGM measurement for that head. I would take the fit shaft to GT and politely ask them if they could help you out by fitting it into a Superdeep head. That would be the simple solution. __________________ Titleist 975D 9.5Pro-lite35x Steelhead plus3 DG R300 TM Rescue 18Bubble s90 JNP 3-pw BV RAW 52,56 Hoofer Xtreme Ping Pal 5ks

Jul 28, 2012, 09:55 AM	#5
nykthornhill Duffer Join Date: May 11, 2011 Posts: 7	Re: Taylormade shaft with adaptor raw length great club

Jul 29, 2012, 05:48 AM	#6
dekker Tour Pro Join Date: Aug 3, 2006 Posts: 11,077	Re: Taylormade shaft with adaptor raw length As a backup plan should my first suggestion be too troublesome for the staff,take a measure tape to GT and simply measure the shaft length as inserted in one of theirs. Remember The r9 overall length is 45.5 __________________ Titleist 975D 9.5Pro-lite35x Steelhead plus3 DG R300 TM Rescue 18Bubble s90 JNP 3-pw BV RAW 52,56 Hoofer Xtreme Ping Pal 5ks Last edited by dekker; Jul 29, 2012 at 05:57 AM.